Connectors

• 4 RJ-45 serial ports (2400 to 230,400bps). Cisco compatible RJ-45 pinout
• 1 RJ-45 10/100Base-T primary Ethernet port
• 1 External USB-2 expansion connector
• 1 external 3G cellular aerial

ACM5004-G-E:

• 4 TTL level digital I/O ports. 5V max @ 20mA
• Dry contacts for 4 external water /smoke / motion sensors

ACM5004-G-I:

• 2 TTL level digital I/O ports. 5V max @ 20mA. Also provides contacts for external water /smoke/ motion sensors
• 2 High-Voltage digital output ports (>5V to <= 30V@ 100 mA)
• Dual SMA antenna connectors – for either receive diversity [AUX] or [GPS]

Power

• External power source +9V to 30 VDC or 9V to 24 VAC
• Also supplied with 110-240V AC to 12VDC external power adapter (for operations up to 50° C only) Power Consumption less than 6W

ACM5004-x-SDC: (48V DC option available all models)

• External 36-72V DC to 12V DC external power converter

ACM5004-G-I:

• Screw terminal block or barrel connector

Dimensions

• 4″ x 3.5″ x 1 1/8″
• (10.2 x 8.8 x 2.8 cm)
• Wall and rack mount bracket

ACM5004-G-I:

• Also includes DIN rail mount

Environmental

• Ambient operating temperature: 5°C to 50°C (41 to 122°F)
• Non operating storage temp: -30 to +60°C (-20 to +140°F)
• Humidity: 5% to 90%
• Internal temperature sensor

ACM5004-G-I:

• Ambient operating temperature: -35° to 74° C (-31° to 165° F)
• Non operating storage temp: -40° to 85° C (-40 to 185° F)

Wireless Certifications

• PTCRB, NAPRD.03, R&TTE, EN 301 511, A-Tick (GSM/UMTS)
• CDG TIA/EIA-690, CDG TIA/EIA-98-E (CDMA/EV-DO)

Emissions

• FCC Part 15 Subpart B Class A Radiated Emissions 30MHz – 1000MHz
• ICES-003 Issue 4 February 2004 Class A Radiated Emissions 30MHz – 1000MHz
• AS/NZS CISPR 22: 2004 Class A Radiated Emissions 30MHz – 1000MHz
• EN55022: 1998 + A1: 2000 + A2: 2003 Class A Radiated Emissions 30MHz – 1000MHz

Immunity

• EN55024: 1998 +A1: 2001 +A2: 2003
• IEC61000-4-2: 1995 ESD 8kV Air Discharge (Direct), 4kV Contact Discharge (Direct/Indirect)
• IEC61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%
• IEC61000-4-4: 1995 EFT/Burst 1.0kV Power Lines, 0.5kV I/O Lines
• IEC61000-4-5: 1995 Surge Immunity 1.0kV Common Mode, 1.0 kV Differential Mode
• IEC61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)
• IEC61000-4-11: 1994 Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods)

Isolation

• Serial Port: 4 kV ESD protection on RS232 and RS422/485 transceivers
• Ethernet Port: 1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection

Other Agency Approvals

• CE
• UL 1950
• TUV
• C-Tick
• RoHS compliant
• NERC CIP Cyber Security compliant
• FIPS 140-2 Validated Module Certificate #1051

CPU

• 250Mhz Micrel KSZ8692 ARM9 System on Chip

Memory

• 32MB DDR RAM
• 16MB Embedded Flash

Operating System

• Linux with source code access
• Custom development kit (CDK)

Wireless Specifications

Opengear ACM5000 cellular routers operate either on the 3G CDMA/EV-DO or the 3G GSM/UMTS network :

• Opengear cellular products by default work in packet switched (PSD) mode across the public Internet or telco managed IP-WANs. By default they do not operate in circuit switched (CSD) mode like a dial-up modem and answer data calls. However expert users/developers can program them to operate in CSD mode for legacy applications.
• To use an Opengear cellular product you need a corporate mobile data service/plan (and a SIM card for GSM) from your telco provider with a public (static or dynamic) IP address. If your plan only provides a private IP address which is not visible across the Internet:
  • you can deploy a VCMS or CMS6100 at the central location which will provides a gateway to remote cellular units 
  • these cellular devices can also be accessed over corporate VPNs using IPSec or OpenSSL
• Access to remote cellular devices is via a secure browser (HTTPS), secure terminal emulators (SSH)
• Opengear’s SDTConnector SSH tunnelling software enables access specific network services (RDP, VNC, SOL, KVM over IP)
• Opengear cellular products also support M2M applications, serial COM port redirection (PortShare), serial bridging and digital I/O control
• Managed devices on the Opengear device’s private network can be securely IP accessible from VPN clients or the corporate VPN